Heterocyclic system. XI. Synthesis of 1H,4H-pyrazolo[4,3-b]pyrrolizine and 2H,4H-pyrazolo[4,3-b]pyrrolizine derivatives

Cyclization of pyrrolidinocarboxamide derivatives of 1-phenyl-5-(1H-pyrrol-1-yl)-1H-pyrazole-4-carboxylic acid and 2-phenyl-3-(1H-pyrrol-1-yl)-1H-pyrazole-4-carboxylic acid afforded imminium salts which were transformed into the corresponding ketones. Further reduction of the latter compounds furnished the title derivatives.     

One-pot synthesis of novel spiro-annelated pyrrole-containing heterocyclic systems from suitable synthons

New tetracyclic systems containing a pyrrolobenzodiazepine 5 or a pyrrolobenzotriazepine 6 moiety bounded by a spiro linkage to the piperidine nucleus are described. They have been synthesized by a simple reaction involving the interaction between proper aromatic amines and 4-oxopiperidines substituted or not at the 1-position in the presence of maleic acid as a catalyst. The synthesis of spiropyrrolo[1,2-a]quinoxaline-2,4′-piperidine 7 and its 1′-acyl derivatives by the same procedure is also reported.     

CeO2-Y2O3涂层和负载型Pd催化剂催化燃烧VOCs

制备了一种粘附在堇青石蜂窝陶瓷载体上的CeO_2-Y_2O_3(CeY)复合氧化物新涂层.以二氧化铈和柠檬酸钇为前驱体,制备过程中无有害物质产生,对环境友好.CeY涂层和Pd/CeY催化剂通过SEM、EDX、XRF和Raman光谱等表征.结果表明,此涂层的粘结强度高,对活性组分的吸附性能好,适合用来负载钯催化剂.Y_2O_3大部分进入了峰窝陶瓷的孔道内,CeO_2和Pd物种则富集在载体的表面.以CO、甲苯和乙酸乙酯的催化燃烧来评价Pd/CeY催化剂的性能,此催化剂具有较好的催化活性和热稳定性.500℃焙烧的催化剂,CO、甲苯和乙酸乙酯的T_(99)(转化率99%以上所需的最低反应温度)分别为150、220和310℃;1050℃焙烧的催化剂,它们的T_(99)分别为180、250和330℃.高温焙烧的催化剂,活性物种PdO的晶粒增大,这可能导致催化剂的活性下降.     

Temperature-controlled highly selective dimerization of α-methylstyrene catalyzed by Brönsted acidic ionic liquid under solvent-free conditions

A temperature-controlled highly selective dimerization of α-methylstyrene to produce 2,4-diphenyl-4-methyl-1-pentene and 1,1,3-trimethyl-3-phenylindan was catalyzed by Brönsted acidic ionic liquid [Hmim]⁺BF₄⁻. At 60 °C, 2,4-diphenyl-4-methyl-1-pentene was formed in 93% selectivity with >92% conversion under a solvent-free condition while 1,1,3-trimethyl-3-phenylindan could be obtained in 100% selectivity when the reaction temperature was increased to 170 °C. The ionic liquid [Hmim]⁺BF₄⁻ could be reused with almost no loss of activity.     

Biotransformation of citrus aromatics nootkatone and valencene by microorganisms

Biotransformations of the sesquiterpene ketone nootkatone from the crude drug Alpiniae Fructus and grapefruit oil, and the sesquiterpene hydrocarbon valencene from Valencia orange oil were carried out with microorganisms such as Aspergillus niger, Botryosphaeria dothidea, and Fusarium culmorum to afford structurally interesting metabolites. Their stereostructures were established by a combination of high-resolution NMR spectral and X-ray crystallographic analysis and chemical reaction. Metabolic pathways of compounds and by A. niger are proposed.     

Adsorption of formaldehyde on Pt(111) and Pt(100) electrodes: cyclic voltammetry and scanning tunneling microscopy

The adsorption of formaldehyde (HCHO) on Pt(111) and Pt(100) electrodes was examined by cyclic voltammetry (CV) and in situ scanning tunneling microscopy (STM) in 0.1 M HClO(4). The extent of HCHO adsorption at both Pt electrodes was evaluated by comparing the CVs, particularly for the hydrogen adsorption and desorption between 0.05 and 0.4 V, obtained in 0.1 M HClO(4) with and without HCHO. The adsorption of HCHO on these Pt electrodes was significant only when [HCHO] >/= 10 mM. Adsorbed organic intermediate species acted as poisons, blocking Pt surfaces and causing delays in the oxidation of HCHO. Compared to Pt(111), Pt(100) was more prone to poisoning, as indicated by a 200 mV positive shift of the onset of HCHO oxidation. However, Pt(100) exhibited an activity 3 times higher than that of Pt(111), as indicated by the difference in peak current density of HCHO oxidation. Molecular resolution STM revealed highly ordered structures of Pt(111)-( radical7 x radical7)R19.1 degrees and Pt(100)-( radical2 x radical2) in the potential region between 0.1 and 0.3 V. Voltammetric measurements further showed that the organic poisons produced by HCHO adsorption behaved differently from the intentionally dosed CO admolecules, which supports the assumption for the formation of HCO or COH adspecies, rather than CO, as the poison. On both Pt electrodes, HCHO oxidation commenced preferentially at step sites at the onset potential of this reaction, but it occurred uniformly at the peak potentials.     

Shape-selective synthesis and oxygen storage behavior of ceria nanopolyhedra, nanorods, and nanocubes

Single-crystalline and uniform nanopolyhedra, nanorods, and nanocubes of cubic CeO2 were selectively prepared by a hydrothermal method at temperatures in the range of 100-180 degrees C under different NaOH concentrations, using Ce(NO3)3 as the cerium source. According to high-resolution transmission electron microscopy, they have different exposed crystal planes: {111} and {100} for polyhedra, {110} and {100} for rods, and {100} for cubes. During the synthesis, the formation of hexagonal Ce(OH)3 intermediate species and their transformation into CeO2 at elevated temperature, together with the base concentration, have been demonstrated as the key factors responsible for the shape evolution. Oxygen storage capacity (OSC) measurements at 400 degrees C revealed that the oxygen storage takes place both at the surface and in the bulk for the as-obtained CeO2 nanorods and nanocubes, but is restricted at the surface for the nanopolyhedra just like the bulk one, because the {100}/{110}-dominated surface structures are more reactive for CO oxidation than the {111}-dominated one. This result suggests that high OSC materials might be designed and obtained by shape-selective synthetic strategy.     

Separation of PAHs in aerosol by thin layer chromatography for compound-specific stable carbon isotope analysis

A method using a thin layer chromatography (TLC) for compound-specific stable carbon isotope analysis of polycyclic aromatic hydrocarbons (PAHs) with four to seven rings was developed in this study. Five aerosol samples were used as test samples. Two stationary phases and eight developing systems were tested. The results indicated: (1) silica gel is superior to aluminum oxide and the silica gel precoated plate developed with hexane:chloroform (45:5, v/v) can give the best separation effect; (2) individual PAHs associated with aerosols can be effectively separated from unresolved complex mixture (UCM) by this procedure. The carbon isotope composition of PAHs can be measured with a standard deviation (S.D.) < 0.5‰, n = 4. No significant isotopic fractionation was observed during the TLC procedure. And this technique can be used as a potential tool for source identification of PAHs in the aerosols.     

Xanthine oxidase inhibitors from the heartwood of Vietnamese Caesalpinia sappan

From the MeOH extract of Vietnamese Caesalpinia sappan, a novel biogenetically exclusive benzindenopyran, with a new carbon framework, neoprotosappanin (1), and a new compound, protosappanin A dimethyl acetal (3), were isolated together with protosappanin E-2 (2), neosappanone A (4), and 13 previously reported phenolic compounds (5-17). Their structures were elucidated on the basis of spectroscopic data. Compounds 1-4, 7, 13, and 15-17 showed significant xanthine oxidase inhibitory activity in a concentration-dependent manner, and sappanchalcone (17) showed the most potent activity with an IC50 value of 3.9 microM, comparable to that of positive control allopurinol (IC50, 2.5 microM). The kinetic study of these inhibitors indicated that they are competitive inhibitors, the same as allopurinol, except for 1 and 16 which are noncompetitive inhibitors.     

Relation between surface preconditioning and metal deposition in direct galvanic metallization of insulating surfaces

The relation between surface preconditioning and metal deposition in the direct galvanic metallization of different insulating polymer surfaces by the so-called PLATO technique was studied using electrochemical and surface analytical methods. AFM, XPS and contact angle measurements show that the chromic acid etching of original polymer surfaces leads to an increase of the surface energy and hydrophilicity of polymer substrates due to both surface roughening and the formation of -COOH and/or -COH surface groups. However, decisive for the subsequent surface activation with cobalt sulfide is the increase in surface roughness. The influence of the degree of activation and the electrode potential on the kinetics of Ni metallization was studied by current transient measurements on activated line-shaped structures. The results suggest that the electrochemical reduction of cobalt sulfide to cobalt is a necessary step to induce the process of Ni electrodeposition. Successful Ni metallization could be obtained on ABS (acrylonitrile-butadiene-styrene) and PEEK (poly-ether-ether-ketone) surfaces. The lateral propagation rate, V _x , of the depositing Ni layer depends exponentially on the applied potential and was found to be several orders of magnitude higher than the Ni deposition rate, V _z , in the normal z-direction (V _x /V _z =10²–10⁴). It was demonstrated that the approach involving cobalt sulfide pre-activation can also be applied successfully for metallization of oxidized porous silicon surfaces.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany